Residential Project
TUFF-N-DRI® Quick Cure 90 Waterproofing Membrane
TUFF-N-DRI® QC 90 is a liquid applied, polymer modified asphalt, waterproofing membrane designed for backfilled foundation walls on residential and light commercial buildings.
Key Features:
- Can be applied to damp or green concrete, allowing application quickly after the removal of forms or following wet weather.
- Exceptional ability to hang on the wall and build targeted thickness — designed to span below grade foundation wall cracks up to 1/8" with a cured thickness of 60 mils (90 wet mils).
- Rain safe in approximately 90 minutes after application, allowing for wide windows of suitable application weather when precipitation is imminent.
Tremsil® 400
Tremsil® 400 is a single-component, medium-modulus silicone sealant that is specifically designed to achieve a watertight seal in expansion joints and for general perimeter caulking of windows, doors and frames, pre-cast and tilt-up panels.
Key Features:
- Ideal for a variety of window, door and expansion joint applications
- Fast installation with primerless adhesion to most substrates
- Easy application with conventional caulking equipment and no mixing required
Nudura® ICF
Nudura has 4 different ICF series and various accessories to cover all of your building needs. Building with Nudura ICFs gives you the opportunity to build faster and more efficiently while offering you an eco-friendly structure with substantial benefits that contribute to long-term energy savings.
Key Features:
- Nudura ICFs provide superior insulation, which significantly reduces the energy required to heat and cool a home.
- A cost-effective building material that results in up to 60% savings in annual utility costs.
- Nudura's webs are made from recycled polypropylene, reducing waste and the house's carbon footprint.
Prebuck® Window & Door Buck
Prebuck Window and Door Buck offers contractors, owners and designers an engineered solution for punched openings. Produced with 1-½” (38 mm) thick, treated Laminated Strand Lumber (LSL), Prebuck Window and Door Buck assures that the rough frame of the opening provides stable support for glazing and finish components.
Key Features:
- Treated throughout — no need to field treat after cutting and drilling
- Designed for direct contact with concrete
- Consistent density and performance across the entire cross section
Vulkem® 116
.WebP?ext=.webp)
Vulkem® 116 is an excellent general-purpose moisture-curing sealant for construction applications, including sealing expansion joints, window and door perimeters and masonry work.
Key Features:
- A 30-year history of proven performance and durability.
- Suitable for a wide variety of applications.
- Fast installation process with a cure that can be accelerated with catalyst, as needed.
EnviroDri™
EnviroDri™ is an asphaltic, fluid-applied, vapor permeable weather-resistant barrier. Designed for residential and multi-family projects, EnviroDri™ is durable and unaffected by high winds and driving rain.
Key Features:
- EnviroDri creates a continuous air and vapor barrier.
- 4-month UV resistance provides extended time for facade installation.
- Has a tenacious adhesion that is unaffected by high winds and driving rain.
Prebuck® Sill Plate
The Prebuck wet-set sill plate is made with materials that allow direct contact with concrete and offers the builders and design professionals an engineered solution for flatter, straighter sill plates. Produced with 1 ½” (38 mm) thick, treated Laminated Strand Lumber (LSL) our sill solution is produced straight and stays straight.
Key Features:
- Treated LSL product will not delaminate, become spongy or lossen fastener strength - will not up, twist, warp or curl.
- LSL bending strength minimizes need for internal bracing before concrete pour.
- Designed for direct contact with concrete
Multi-Residential Project
TREMproof® 560A Waterproofing Membrane
TREMproof® 560A Waterproofing Membrane is a self-adhesive waterproofing membrane specifically designed for below grade waterproofing. The membrane is composed of SBS modified bitumen with a tri-laminated woven polyethylene facer. Designed for use over concrete, block and Nudura Insulated Concrete forms,TREMproof 560A is ideal for most backfilled wall applications.
Key Features:
- Cold Applied: Fast and easy, peel and stick application without the saftey risks of torching.
- Manufactured to a preset, uniform thickness that provides consistent and uniform coverage.
- Highly flexible material designed to easily form around corners and contours.
- The cross laminated facer ensures dimensional stability of the membrane when exposed to elevated temperatures and stresses.
Vulkem® OC810 Deck Coating
Vulkem® OC810 is a high solids, UV stable, waterproof deck coating system designed to be installed in a single coat with comfortable rubber aggregate. This low odor, low VOC deck coating serves as a comfortable, walkable membrane ideal for balconies, terraces, and other areas subjected to lighter pedestrian traffic.
Key Features:
- Single coat application reduced installation time and promotes labor cost savings.
- Low odor and low VOC formula makes Vulkem OC810 an ideal product for inhabited structures.
- Fast cure through time allows for minimal downtime and use of space the day after installation.
Dymonic® 100
Dymonic® 100 is a single-component, medium modulus, non-sag polyurethane sealant, that offers a durable flexible seal that performs excellently in moving joints and exhibits tenacious adhesion to substrates once fully cured.
Key Features:
- Adheres to damp or green concrete without outgassing.
- Improved aesthetics through low dirt pickup and a variety of standard color options to choose from.
- Included in several fire rated systems.
Dryvit® Weatherlastic® Smooth
Weatherlastic Smooth is a water-based elastomeric wall coating. It is easily applied with an airless spray or roller. Weatherlastic Smooth is based upon a 100% acrylic, co-polymer elastomeric resin, which provides excellent elongation and flexibility at low temperatures. The coating resists mildew growth and dirt pickup and is highly chalk resistant.
Key Features:
- Less likely to crack when it reaches a certain temperature
- Resists mildew longer
- Bridges hairline cracks
Prebuck® Window & Door Buck
Prebuck Window and Door Buck offers contractors, owners and designers an engineered solution for punched openings. Produced with 1-½” (38 mm) thick, treated Laminated Strand Lumber (LSL), Prebuck Window and Door Buck assures that the rough frame of the opening provides stable support for glazing and finish components.
Key Features:
- Treated throughout — no need to field treat after cutting and drilling
- Designed for direct contact with concrete
- Consistent density and performance across the entire cross section
ExoAir® 2000 Air Barrier
ExoAir® 2000 Fluid-Applied Synthetic Permeable Air Barrier Membrane is a monolithic, flexible membrane designed to be rolled or sprayed onto exterior above-grade wall assemblies to mitigate air infiltration/exfiltration and water penetration while remaining permeable to the passage of water vapor.
Key Features:
- A seamless, monolithic membrane that creates a fully adhered air barrier.
- Ability to roller or spray apply the material.
Nudura® ICF
Nudura has 4 different ICF series and various accessories to cover all of your building needs. Building with Nudura ICFs gives you the opportunity to build faster and more efficiently while offering you an eco-friendly structure with substantial benefits that contribute to long-term energy savings.
Key Features:
- Nudura ICFs provide superior insulation, which significantly reduces the energy required to heat and cool a home.
- A cost-effective building material that results in up to 60% savings in annual utility costs.
- Nudura's webs are made from recycled polypropylene, reducing waste and the house's carbon footprint.
Dryvit® Specialty Finishes
For over 50 years, Dryvit's selection of industry leading colors and finishes have allowed architectural trendsetters to make the bold choices necessary for their projects to standout. From traditional options to the most unique alternatives, every Dryvit system offers vivid, fade-resistant finishes.
Key Features:
- A wide range of colors and finishes like brick, granite, metals, stucco and more provide maximum flexibility in your roof and façade aesthetic.
Spectrem® 2
Spectrem® 2 is a single-component medium-modulus silicone sealant ideal for a variety of perimeter caulking and glazing applications, including 2-sided structural glazing. It is intended for use on substrates such as aluminum, glass, steel, painted metal, plastic, stone, concrete and brick.
Key Features:
- Ideal for a variety of applications eliminating the need for other products on the jobsite.
- Excellent adhesion to many common substrates such as glass, metal, brick and stone.
- Exceptional weatherability through high-resistance to UV, temperature extremes, driving rain and ozone.
Parking Garage
Willseal® 250 Expansion Joint
Willseal® 250 is a pre-compressed, self-expanding foam joint seal with a factory-applied, traffic-grade silicone sealant face. Willseal® 250 is designed is to provide a watertight, UV-stable primary seal in horizontal applications subject to vehicular and/or pedestrian traffic, including those exposed to solvents and fuels such as those found in parking garages.
Key Features:
- Weathertight seal protects against moisture infiltration, dust, air, noise and thermal changes.
- Resistant to UV exposure and most chemicals normally present in vehicular structures.
- Utilizes non-invasive anchoring and leaves no unbonded laminations.
Vulkem® EWS Vehicular Traffic Coating System
Vulkem® EWS with PUMA Technology is designed to have tenacious adhesion and extreme abrasion resistance. It can be walked on in one hour, which will minimize operation disruption. Vulkem Extreme Wearing System (EWS) is a waterproof traffic deck coating system that utilizes polyurethane-methacrylate (PUMA) technology.
Key Features:
- The Vulkem EWS Vehicular System is a cold applied traffic coating system designed for waterproofing concrete slabs and protecting occupied spaces beneath from the damaging effects of water intrusion.
- Installation requires minimal downtime (30 to 45 minutes) between coats, even in cold temperatures, mitigating the closure of areas being coated.
- Ideal for high wearing areas such as drive lanes, helical turns, ramps and ticket spitters.
EUCOREPAIR V100
EUCOREPAIR V100 is a single-component, quick-setting, low shrinkage repair mortar formulated with unique polymers and fiber reinforcement for trowel applied vertical and overhead repairs requiring high performance.
Key Features:
- Single component for easy mixing and handling.
- Excellent freeze resistance for difficult climates.
- Polymer modified with fiber reinforcement.
- Contains an integral corrosion inhibitor.
- Low permeability helps protect rebar from corrosion.
- High bond strength provides excellent adhesion.
DURAFLEX Fastpatch
DURALFLEX FASTPATCH is a three-component, 100% solids, low-modulus, moisture insensitive, epoxy repair kit designed to provide a high strength, wear resistant surface to worn and damaged high-use floors.
Key Features:
- No measuring needed, components are pre-measured
- Low modulous resin binder used for stress relief and resistance to impact
- Resistant to thermal and mechanical movements
- Rapid cure minimizes downtime
- May be applied as low as 40°F (4°C)
Willseal® Color Coreseal V
Willseal® Color Coreseal V is a lightweight, closed-cell ethylene vinyl acetate (EVA) copolymer foam with a factory-applied sealant coating designed to provide a watertight, dust-proof, airtight, noise reducing, thermally insulating and UV stable primary seal for vertical applications.
Key Features:
- Closed-cell foam is impermeable to water and provides a seal in dynamic joints.
- Available factory-coated with silicone sealant in standard or custom colors to match the desired appearance.
- Monolithic construction will not delaminate.
- Compressible foam installs easily and utilizes non-invasive anchoring.
Vulkem® EWS Pedestrian Traffic Coating
The Vulkem EWS Pedestrian System with PUMA Technology is designed to dramatically reduce the amount of time necessary to return coated areas to service. This system can be walked on one hour after application and can be installed above living space. This waterproof deck coating system utilizes polyurethane-methacrylate (PUMA) technology to protect concrete slabs from deterrioration and the areas beloe them from damage resulting fromt he ingress of water.
Key Features:
- PUMA technology delivers extreme durability while maintaining its crack bridging characteristics, eliminating the need for reinforcing fabric.
- Rapid set-up times allow for quick overall installation, as well as the ability to open coated areas to traffic one hour after installation.
- Vulkem EWS can be installed in temperatures as low as 14°F (-10°C), which allows for the continuation of project installations in colder months.
VERSASPEED LS 100
VERSASPEED LS 100 is a single-component, rapid hardening, low shrinkage, micro-fiber reinforced horizontal repair mortar for projects that require traffic or a non-breathable coating within hours. Repaired areas may be open to standard tire traffic 2 hours following the final set and an epoxy coating can be applied after 4 hours.
Key Features:
- Rapid set time and strength gain
- Suitable for interior and exterior applications
- Open to light duty traffic in as soon as one hour
- Coat with epoxy after 4 hours at 70°F (21°C)
- Micro-fiber reinforced
- Shrinkage compensated and reduced
- Contains an integral corrosion inhibitor
- Can be placed up to 4 in (10cm) neat
Dymonic® 100
Dymonic® 100 is a single-component, medium modulus, non-sag polyurethane sealant, that offers a durable flexible seal that performs excellently in moving joints and exhibits tenacious adhesion to substrates once fully cured.
Key Features:
- Adheres to damp or green concrete without outgassing.
- Improved aesthetics through low dirt pickup and a variety of standard color options to choose from
- Included in several fire rated systems
School
Nudura® ICF
Building a public school today means choosing products and materials that reduce any negative environmental impact and improve energy efficiency to save taxpayer money. ICFs offer many advantages, as the sustainable material creates a high-performance building envelope with maximum insulation.
Key Features:
- Nudura ICFs provide superior insulation, which significantly reduces the energy required to heat and cool a home.
- A cost-effective building material that results in up to 60% savings in annual utility costs.
- Nudura's webs are made from recycled polypropylene, reducing waste and the house's carbon footprint.
Dymonic® 100
Dymonic® 100 is a single-component, medium modulus, non-sag polyurethane sealant, that offers a durable flexible seal that performs excellently in moving joints and exhibits tenacious adhesion to substrates once fully cured.
Key Features:
- Adheres to damp or green concrete without outgassing.
- Improved aesthetics through low dirt pickup and a variety of standard color options to choose from
- Included in several fire rated systems
Vulkem® X4
Vulkem® X4 is a fast-cure waterproof roofing membrane designed to be used in a fully reinforced application. This two-component modified polyurethane methacrylate membrane cures in as little as 45 minutes. Vulkem X4 has high reflectivity, lowering rooftop temperatures to help provide building energy savings.
Key Features:
- Vulkem X4 is ideal for new construction direct to concrete applications including vegetative roofing systems.
- Low odor and Low VOC allowing for appliction in a variety of locations including odor sensitive projects.
- Fast cure, two-component waterproofing membrane cures in 45 minutes.
- Vulkem X4 exhibits superior elongation and crack bridging properties.
Proglaze® SSG
Proglaze® SSG is a single-component high-modulus silicone sealant ideal for a wide variety of glazing applications that call for fast through-cure and exceptional tensile strength.
Key Features:
- Excellent in a variety of infield and in-plant glazing applications.
- Tested to the industry's most stringent impact.hurricane standards.
- Fast curing and tack-free in 15 minutes.
Vulkem® 350NF/346TC Deck Coating System
Vulkem® 350NF/346TC is a composite waterproofing system comprised of tough-curing liquid polyurethane. It cures to form a rubber membrane surface that provides a lasting and easy-to-clean coating. Textured surfaces for pedestrian traffic will use an aggregate-laden top membrane to aid in wear and slip resistance. Vulkem 350NF/346TC may be used to apply a seamless monolithic waterproof membrane to concrete and primed metal surfaces.
Key Features:
- Protects against water, deicing salts, chemicals, gasoline, oils and anti-freeze.
- Safeguards concrete surfaces against environmental contaminants, like mildew and fungus.
- Excellent durability and UV resistance extends the life of the system.
Prebuck® Window & Door Buck
Prebuck Window and Door Buck offers contractors, owners and designers an engineered solution for punched openings. Produced with 1-½” (38 mm) thick, treated Laminated Strand Lumber (LSL), Prebuck Window and Door Buck assures that the rough frame of the opening provides stable support for glazing and finish components.
Key Features:
- Treated throughout — no need to field treat after cutting and drilling.
- Designed for direct contact with concrete.
- Consistent density and performance across the entire cross section.
TREMproof® 260 Waterproofing Membrane
TREMproof® 260 Waterproofing Membrane is a polymer-enhanced, single-component, fluid-applied, asphalt emulsion, below-gradewaterproofing membrane. It is available in both a spray and roller grade.
Key Features:
- Typical applications for TREMproof 260 include foundation walls (including ICF), retaining walls, and most backfilled applications and unsubmerged blindside applications.
- Monolithic asphaltic membrane protects seams and seals penetrations reducing time required for detail work.
- TREMproof 260 is a fully-adhered waterproofing membrane and cost-effective solution for backfilled and blindside applications that can be applied to damp or green concrete allowing application more quickly after the removal of forms or following wet weather.
- The ability to co-spray the material to speed the curing process allows for fast-tracking construction and reduces the potential for washout in the face of inclement weather.
Prebuck® Parapet Cap
The Parapet Cap offers the contractor, owner and design community an engineered solution for terminating parapet wall assemblies of their structure. This parapet “nailer” will interface with framing, air barriers, roofing and finish materials (especially metal coping).
Key Features:
- Designed for direct contact with concrete.
- Insect and fungus resistive.
- Will not cup, twist, warp or curl.
- Provides a solid anchoring surface.
Dryvit® Textured Finishes
Whether you're looking to create a contemporary, historical or completely unique look for your building, we have the solutions to help you achieve your goal. Dryvit's range of standard textures are available in an incredible array of colors, helping your building stand out.
Key Features:
- Dirt pickup resistant finish options
- Lightweight, mildew resistant and hydrophobic finishes
- Long-term stability
- UV resiliency
Dryvit® Specialty Finishes
Create an impact with specialty finish. A building's exterior finish is critical to its overall look and curb appeal. Our collection of specialty finishes delivers beauty, strength and durability to buildings everywhere. From the old world look of plaster to smooth metallics, Dryvit finishes have all the options you need to realize your design vision.
Key Features:
- 100% acrylic based
- Dirt pickup resistant technology
Spectrem® 2
Spectrem® 2 is a single-component medium-modulus silicone sealant ideal for a variety of perimeter caulking and glazing applications, including 2-sided structural glazing. It is intended for use on substrates such as aluminum, glass, steel, painted metal, plastic, stone, concrete and brick.
Key Features:
- Ideal for a variety of application eliminating the need for other products on the jobsite.
- Excellent adhesion to many common substrates such as glass, metal, brick and stone.
- Exceptional weatherability through high-resistance to UV, temperature extremes, driving rain and ozone.
Dymonic® FC
Dymonic® FC is a single-component, low-modulus, hybrid sealant formulated with proprietary polymer technology that offers a rapid, durable, flexible seal that performs excellently in moving joints and exhibits tenacious adhesion to substrates once fully cured.
Key Features:
- Rapid performance will not green crack due to early movement.
- Compatible with and adheres to common construction substrates.
- Approved for use with exterior insulation and finish systems.